New Hampshire school glazing: board purchasing, building aid rules and security assessments
For New Hampshire school boards, SAUs and facilities staff: how ordinary purchasing differs from the school building aid process, where the HSEM security assessment matters, and what the rules say about security film in aided projects.
By Shore Tint & More editorial team · · 7 min read
Official sources checked . Procurement pages change; confirm with the agency.
Key takeaways
- Under Ed 303.01(b), each school board adopts the purchasing policy for equipment, supplies and services and may delegate commitments to the superintendent; ordinary film purchases follow that local policy.
- In school building aid applications, Ed 321.15(g) asks for an HSEM school security assessment not more than 3 years old only if the district is seeking security ranking points.
- Ed 321.10 lists security film on exterior door vision panels and sidelites among minimum safety standards for aided new construction, additions and substantial renovations; it is not a rule for every existing building.
Ordinary purchasing versus school building aid
New Hampshire's education rules, published by the General Court at Ed 300, set two very different contexts. Ed 303.01(b) says each school board shall adopt policies to control the purchase of equipment, supplies or services and may delegate authority to the superintendent to make financial commitments under that policy. A film project on existing glass, outside a building aid project, follows that local policy and the district or SAU's own process.
School building aid is a separate state process for new buildings, additions and substantial renovations under Ed 321, with its own application, scoring and standards. Only projects inside that process are subject to its building aid requirements.
| Path | Rule | What applies |
|---|---|---|
| Ordinary purchase | Ed 303.01(b) | The school board's purchasing policy and any delegation to the superintendent |
| Building aid application | Ed 321.15 and Ed 321.16 | Application contents and project ranking; an HSEM assessment matters only for security ranking points |
| Aided construction standards | Ed 321.10 | Minimum safety construction standards for aided new buildings, additions and substantially renovated areas |
When the HSEM assessment matters
Ed 321.15(g) says a building aid application seeking ranking points for school security under Ed 321.16(f)(2) must include a copy of a school security assessment not more than 3 years old, completed by New Hampshire Homeland Security and Emergency Management (HSEM). Ed 321.16(f)(2) awards up to 100 points for correcting building or site deficiencies involving construction or substantial site modifications identified in that assessment.
That is a condition for those points, not a requirement for every purchase. This guide does not claim HSEM currently has appointments available or that assessments are offered on any timeline; ask HSEM directly.
What Ed 321.10 says about security film
Ed 321.10(a)(2)(i) lists, among building entry control measures for aided new school buildings, "at a minimum, installation of security film at least 14 millimeters thick on all exterior door vision panels and sidelites." Under Ed 321.10(b) and (c), aided additions and substantial renovations include these items for the new or renovated areas where applicable, and Ed 321.10(d) allows a board to request a waiver if local police and fire departments support it.
The rule text as published says "millimeters". Security film thickness is commonly stated in mils (thousandths of an inch), and 14 millimeters would be far thicker than typical film, so confirm the intended unit with the New Hampshire Department of Education before writing a specification. Thickness alone also does not define performance: specify the exact film and attachment assembly and see why frame attachment matters. Film is not bulletproof.
Looking for an installer in New Hampshire?
No provider is listed for New Hampshire yet. The locator shows the areas that are listed; ask any provider to confirm your project and location.
See listed providers by area →Getting a precise film quote
Recommended steps:
- Confirm which path applies: an ordinary purchase or part of a building aid project.
- Use any existing assessment findings, kept within the district's secure process.
- Group openings by glass type, frame and size, and identify door vision panels and sidelites separately.
- Specify the film and attachment assembly and the documentation required.
- Follow the board's purchasing policy for quotes or bids.
Use the bid scope template and proposal comparison guide. For the funding decision by school type, see the New Hampshire schools funding guide.
Frequently asked questions
Do we need an HSEM assessment to buy window film?
Not under the rules cited here. Ed 321.15(g) asks for one only in a building aid application seeking security ranking points.
Must every New Hampshire school have security film on door glass?
Ed 321.10 applies to school building aid projects for new buildings and for additions or substantially renovated areas, and allows waivers with local police and fire support.
Who approves a film purchase?
The school board's purchasing policy governs, including any authority delegated to the superintendent.
Is there a listed provider for New Hampshire?
Not yet. The locator lists only providers whose public offering has been reviewed.
Sources
- NH General Court: Ed 300 rules (Ed 303.01, Ed 321.10, Ed 321.15, Ed 321.16)
- 3M Security Window Film Installation Guidelines (Jan 2025)
These guides began as AI-assisted drafts from the Shore Tint & More editorial team. Our guides explain product documentation and practical project planning. Manufacturer test claims are linked, and site-specific recommendations require an assessment. Spotted an error? Contact us for corrections.